Bonjour, j'ai changé le fusible de mon autoradio pour ma clio III et il est bloqué ,il faut un code pour le débloquer. Renault veut me facturer ce service O_o.Quelqu'un sait t'il comment changer un code sécurité en code autoradio? Mon code sécurité est T503.
Je vous remercie d'avance!
Rororo69 code 6468
You must hold at the end to store your code.
IF YOU DONT HAVE ¬ KEY THEN PUSH THUMBWHEEL IN AND SOME HAVE {A¬} KEY
Turn on the radio and the display will show 'CODE'
Use the steering controls for code entry.
Press the [ ¬] button then rotate the thumb wheel for the correct first digit
Press the [ ¬] button then rotate the thumb wheel for the correct second digit
Press the [ ¬] button then rotate the thumb wheel for the correct third digit
Press the [ ¬] button then rotate the thumb wheel for the correct fourth digit
If the correct code is now shown on screen,
press and hold the [ ¬] button for up to 10 seconds to store the code
FOR NO STEERING CONTROL
press the first preset button for the 1st digit,
second button for the 2nd digit
third button for 3rd digit
forth button for 4th digit
then press and HOLD button 6 to store. for 10 seconds
and on some it's hold 5 to store.
You need to remove the radio.
they are too small holes each side of the radio
use an old metal coat hanger 4 darts or very small screwdriver or long nails.
put into holes about 4-5cms and push outwards sideways
and carefully pull radio forward.
you must do the holes on each side at the same time
Then post the numbers/letters from below the main barcode
something like 7700xxxxxxtt123 or 8200xxxxtt123 or
the security code like Q123 or T0U123
can be found in a small box then i can help you
off of the radio
Bonjour ,
Pouvez vous m indiquer comment vous avez trouve ce code en effet j ai le meme probleme sur mon poste j ai change le fusible et le code ne fonctionne plus.
Merci de votre retour,
You need to remove the radio.
They are too small holes Each side of the radio
use an old metal coat hanger 4 darts or very small screwdriver or long nails.
put into holes about 4-5cms and push outwards sideways
and Carefully pull radio forward.
you must do the holes on Each side at the same time Then post the numbers / letters from below the main barcode something like 7700xxxxxxtt123 gold 8200xxxxtt123 or the security code like Q123 or T0U123 can be found in a small box Then i can help you off of the radio email me at codehelp@hotmail.co.uk
Securty L311 = code 3386 you must HOLD at the end to store the code
Code Entry as Follows:
Switch Radio On - Display Shows
" 0000 " with the 1st digit flashing
Rotate " Thumbwheel " For Correct Digit
Press " ¬ " On The Stalk Control To Enter
Rotate " Thumbwheel " For Correct Digit
Press " ¬ " On The Stalk Control To Enter
Rotate " Thumbwheel " For Correct Digit
Press " ¬ " On The Stalk Control To Enter
Rotate " Thumbwheel " For Correct Digit
If the correct code number is now shown
Press And Hold " ¬ " Until A Beep Is Heard
Hello suite has a fuse change I also can not find the code. A ugly please :) I think J044
Reference (s):
Loss code = = = code 7983
you must HOLD at the end to store the code
Code Entry as Follows: Switch Radio On - Display Shows "0000" with the 1st digit flashing Rotate "Thumbwheel" For Correct Digit Press "¬" On The Stalk Control To Enter Rotate "Thumbwheel" For Correct Digit Press "¬" On The Stalk Control To Enter Rotate "Thumbwheel" For Correct Digit Press "¬" On The Stalk Control To Enter Rotate "Thumbwheel" For Correct Digit If the correct code number is now shown Press And Hold "¬" Until A Beep Is Heard